Commit graph

2 commits

Author SHA1 Message Date
The Dust Council
335d83f8a0 Hear every sensor in the garden, not only the loudest one
Reported as reading nothing at all with several sensors in range.  Two faults,
either of which is enough on its own, and both of them things I assumed rather
than checked -- this was written against messages I generated myself and never
against a sensor.

The first is the threshold.  Bursts were found by setting one level per second
of band, halfway between the noise floor and the loudest thing in that second.
That is the obvious way to write it and it is wrong: a sensor on the windowsill
and a sensor at the end of the garden differ by forty decibels, so a level set
halfway to the near one sits above everything the far one ever does.  The far
ones do not come through weakly, they vanish -- and vanish only while the near
one is transmitting, which is as confusing a symptom as radio produces.  A
block with one loud sensor in it yielded exactly one sensor however many were
out there.

Finding bursts is now two passes.  The first asks only where anything happened
at all and asks it against the noise -- the bottom fifth of the second, which
is noise however busy the rest was, and which does not move when something
loud arrives.  Whatever clears that is grouped into regions, and the second
pass re-thresholds each region against its own high and low.  Every sensor is
sliced at its own amplitude.  Six sensors spanning eighty times in strength
now all come back from one second of band.

The second fault is that the slicer knew how a bit is drawn.  It read a pulse
by comparing it with the gap that followed, which is right when the gap is the
complement of the pulse so that every bit takes the same time, and wrong when
the gap is a fixed spacer: a two-hundred-and-twenty microsecond pulse against
a two-hundred microsecond spacer is the longer of the two and reads as a one,
which is the wrong bit, and then every message fails its checksum having said
nothing about why.  Nothing is assumed now -- not which of the pulse and the
gap carries the bit, not whether the gap is a complement or a spacer, not
which of long and short means one.  The same burst is read half a dozen ways
and the checksums say which reading it was, at most one being able to satisfy
one.  Copies are counted per message rather than per reading, or two readings
of one burst would corroborate each other and the rule protecting the two
thinly-checked models would protect nothing.

Both were caught the same way: by measuring, rather than by reading the code
again.  A thousand seconds of the invented garden still yields no sensor that
is not there, and reception of the ones that are is up by a quarter, because
bursts that used to be masked now decode.

And, because none of the above should have needed me: `bandsaunter weather
--diagnose` prints each second taken apart stage by stage -- the noise, the
level a burst must clear, the loudest thing in the block, then every burst
with the lengths of its pulses and gaps and whatever was made of them.  Those
lengths are the useful part: a real message has two or three of them and
nothing in between, which says at a glance whether the trouble is the radio or
the arithmetic.  At the end it says which of five things it was: nothing
arriving, nothing above the noise, something never keyed, bursts that framed
as nothing, or messages that framed and arrived only once.  `--save-iq FILE`
keeps the raw samples for whatever that cannot settle.

Full suite 2286 passed; the new work checked against six deliberately broken
builds.  Built as 2026-09-07_02.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016PsWPTweCT6pwxKngvVxcg
2026-09-07 18:22:53 -07:00
The Dust Council
65cc03b78d Read the weather sensors on 433 MHz, and let them be given names
A consumer weather station is two things.  The display on the kitchen wall is
one of them; the other is a plastic box on a fence post that says what it can
see every sixteen seconds, in the clear, to anyone who happens to be
listening.  This reads the box.

A section of its own, like the aircraft one, and for the same reason: it does
not fit through the scanner.  A sensor message is a burst of a carrier
switched on and off, a fifth of a second long, and the scan path is a squelch
and a recorder -- it would record the bursts as clicks in a WAV file and
decode nothing.  `bandsaunter weather` listens, `bandsaunter readings` reads
a log back, `bandsaunter sensors` says what is out there.  Item 6 in the main
menu is the same thing without a command line.

Five families: the Tower 592TXR, the 5-in-1, the 6045M lightning detector,
the 609TXC and the 606TX.  Temperature, humidity, wind speed and direction,
rainfall, strike counts, how far off the storm is, and battery state from all
of them.  Every one is implemented from its published description and checked
against frames built from the same description, which proves the framing, the
parity, the checksums and the arithmetic and is not the same as having held
one of each.

The naming is the point.  A sensor broadcasts an identity, and that identity
is a number that came out of a hat in a factory; it tells one sensor from
another and is no use at all for telling which is which.  So press n while
listening: the display comes down, the sensors are listed, you name one, and
it goes back up, with the receiver running throughout.  That is the moment it
is possible -- the sensor is on the screen saying 3.1 degrees, and the person
watching is the one who knows that the cold one is the shed.  An hour later it
is a list of hexadecimal again.  Names are written the instant they are given
rather than at exit, to a neighbouring file renamed over the old one, and one
given before a sensor has ever been heard waits under its identity and moves
across when the first message says which model it is.

Four things keep the neighbours' doorbells off the display.  The checks the
message carries; a second copy, for the two models that carry only one byte
of check between them; a plausibility range, because a checksum can be
satisfied by a message the hardware could not send; and where in the burst
the message sits.  That last one is the one that is easy to miss: a seven-byte
message read out of the front of a real eight-byte one is made of that
message's own payload bytes, whose parity is already correct, so the parity
bits contribute nothing and one byte of sum is all that is left -- and
corroboration cannot help, the three copies being identical.  What gives that
window away every time is that it ends a whole byte before the burst does.

The Atlas is nine bytes like the lightning detector and lays its payload out
differently, so every decoder insists on a message type it knows.  Anything
else that frames correctly is reported with its identity and no weather,
because wrong weather under somebody's sensor name is a worse answer than
none.

ism.py now delegates to this rather than keeping a second implementation of
the tower sensor, which fixes the channel letters -- A is 3, B is 2, C is 0,
and there is no D -- and the battery bit, which is set while the battery is
good.  The two thinly-checked models are not reported from a scan at all: a
scan hears one burst, and they need two.

The option menus are now handed the module that owns the options rather than
importing the aircraft one, so one set of screens drives both sections and
will drive a third.

169 new tests, checked against nineteen deliberately broken builds; two of the
tests were too weak to notice their own mutation and were rewritten.  Full
suite 2252 passed.  Built as 2026-09-07_01.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016PsWPTweCT6pwxKngvVxcg
2026-09-07 13:40:33 -07:00